T140 has characteristic of semi-rigid suspension, mechanical drive. The main clutch is hydraulic boosted. The articulated point of the implement cylinder is at both sides of the guard., With hydraulic pilot controlled, electric monitoring, good appearance, it can be used in road building, hydro-electric construction, field modification, port and mine development and other construction.
Overrall dimension(L* W* H) 4763* 3297* 3159 mm Operation weight 16.5 t Horsepower 103.0 kW Max. Drawbar pull 138.5 kN Ground pressure 65.0 kPa Min. Turning radium 3.9 m Min. Ground clearance 400 mm
Gradient longitudinal 30 º Transverse 25º Working efficiency within 40 meters 169m 3 /h Blade capacity 4.5 m 3 Manufacture SHANGHAI DIESEL ENGINE CO., LTD Model D6114ZG5B Type Water-cooled, single row, vertical, 4-stroke-cycle Turbocharged, direct injection Number of cylindersbore* stroke: 6-114* 135 mm Piston displacement: 8.27 L Rated rotation speed: 1800 r/min Rated horsepower: 115 kW Oil consumption: Rated horsepower Fuel consumption: ≤ 220g /kW? H Engine oil consumption: ≤ 0.4% Fuel consumption Max. Torque: 756 N? M/ ≤ 1260rpm Idle speed 700? 25 r/min Max. RPM. Without load ≤ 2088 r/min Altitude 3000 m
Main clutch: Normally opened, multi-plate, powder metallurgy friction plate and hydraulic booster control.
Transmission: Normally meshed helical gear drive, coupling sleeve shift and two levers operation. The transmission has five forward speeds and four backward speeds.
Forward Backward First speed 2.52 km/h First speed 3.53 km/h Second speed 3.55 km/h Second speed 4.96 km/h Third speed 5.68 km/h Third speed 7.94 km/h Forth speed 7.53 km/h Forth speed 10.53 km/h Fifth speed 10.61 km/h
Steering clutch: Multiple-disc oil powder metallurgy disc compressed by spring, hydraulic operated. Brake is oil two direction floating band brake operated by mechanical foot pedal.
Two stage gear deceleration, Duo-cone floating seal, combined carrier roller to facilitate service.
Inner and outer beam of track roller frame are rectangular section frame. Track roller, carrier roller, idler are mounted with long life well sealed Duo-cone floating ring seal.
Track roller (each side): Singe flange 4 Double flange 2 Carrier roller(each side): 2 Idler (each side) 1 Type of track: Single grouser combined Tension mode of track: Hydraulic Pitch: 203 mm Number of shoes(each side) 38 pieces Width of shoe 500 mm Length of track on ground 2570 mm Sealed and lubricated track The pitch, numbers and width of track shoes are the same with the general track.
Hydraulic system of the implement Pump model Two group gears pump Pump type P5100 - F100NM 487 98 / P124 - G10YG System flow Main pump 180L /min Pilot pump 18L /min System pressure Main pump 12MPa Pilot pump 2.5MPa Three group valves For dozing, tilting, ripper Implement cylinder - bore* travel 2- 100* 1082 mm.